Home
Washing Test Machine
Technical Specifications
|
Model |
TA-XD |
|
Outer diameter of test turntable |
500±10mm |
|
Test inner bucket diameter |
SUS316 Stainless steel inner barrel diameterΦ650mm |
|
Test the depth of the inner bucket |
550mm |
|
The height from the center of the battery to the liquid level |
300mm±10mm（customized） |
|
Rotary speed range |
1 ～ 900 RPM adjustable |
|
Speed error |
±0.5% RPM |
|
Servo motor power |
3.0kW |
|
Heating tube power |
6.0kW |
|
Lift platform power |
120W |
|
Pump power |
100W |
|
Solution temperature range |
RT+10℃ ～80℃（adjustable） |
|
Solution temperature deviation |
±2℃ |
|
Solution temperature accuracy |
0.1℃ |
|
Solution temperature heating rate |
RT+10℃～45℃ less than 40min |
|
Drying temperature range |
RT+10℃ ～80℃（adjustable） |
|
Drying temperature deviation |
±2℃ |
|
Drying temperature display accuracy |
0.1℃ |
|
Drying temperature and heating rate |
RT ～ 45℃ 小于10min |
|
lighting |
The test chamber is designed with high brightness LED lighting for easy visibility of the testing conditions inside the chamber |
|
Security protection design |
Overtemperature protection; Equipped with leakage protection device, access control, safety emergency stop switch, and three color light alarm |
|
Explosion proof chain |
The door is equipped with 2 explosion-proof chains to prevent it from being blown away and injuring people |
|
Power Supply |
AC380V 50HZ 19kW |
|
Size |
W1100*D1550*H1750mm |
|
Wieght |
Around 1000kg |
|
Water source |
Need water, port G1/2 |
|
Drainage |
Drainage ditch, interface G1/2 |
Key Features
Standards Compliance
Safety Design
Application
FAQ
-
1.Which washing processes can the equipment simulate?
The equipment can fully simulate the entire process of a household washing machine, including pre-washing, main washing, rinsing, dehydration and drying. It supports the free setting of washing speed, detergent ratio, water temperature (from normal temperature to 90℃) and dehydration centrifugal force. -
2.Do the devices need to be calibrated regularly?
To ensure the accuracy and validity of the test results, it is recommended that the equipment be calibrated once every 12 months. The calibration items include temperature sensor, rotational speed, and timer. Original factory calibration services can be provided, or assistance in connecting to a third-party metrology testing institution can be offered. -
3.Can the parameters be adjusted at any time during the test?
The equipment adopts a PLC touch screen control system, which supports pre-set standard programs to ensure test consistency. At the same time, it can adjust the rotational speed, temperature and time in real time in manual mode. Throughout the process, real-time data curves are generated, and the data can be exported via USB drive.