Home
Hot Products
0102030405
High-Altitude Low-Pressure Test Chamber Factory in China - Reliable Suppliers for Environmental Testing Solutions
📋 Technical Specifications
| Model | TA-DQY-216L/1000L |
| Control Method | PLC touch screen control |
| Test Room |
Consumer products battery or other small cell: W600mm × D600mm × H600mm Big cell or small module: W1000mm × D1000mm × H1000mm |
| Test Pressure Range | 7–101 KPa (adjustable) |
| Control Accuracy | 0.1 KPa |
| Inner Temperature | Normal temperature (the temperature mentioned in the standard can be achieved through laboratory air conditioning) |
| Control Parameter | Touch screen control: time; Pressure, can be freely set and controlled; Meet all standards |
| Storage Rack | Load bearing capacity ≥ 50 Kg; Equipped with 2 storage racks; Material: Stainless steel SUS304 |
| Internal Material | Stainless steel SUS304. Thickness t=3.0mm (thickness can be customized) |
| Sealing Strip | Corrosion resistant silicone |
| Vacuum Pump | Bipolar vacuum pump |
| Automatic Pressure Relief | Automatically control the opening of pressure relief |
| Independent Manual Pressure Relief Valve | On the right side, there is an independent high-pressure sealed manual pressure relief valve: when there is a power outage, this valve can be opened to relieve pressure and the door can be opened |
| Independent Pressure Display Gauge | Real time monitoring and display of inner box pressure on the touch screen |
| Smoke Exhaust | A smoke exhaust pipe with an inner diameter of 19mm extends from the rear of the box; Discharge vacuum pump fumes and a small amount of smoke |
| Lighting | The test chamber is designed with high brightness LED lighting for easy visibility of the testing conditions inside the chamber |
| Terminal Post (optional) | 300A～400A; Size and quantity can be customized |
| Voltage Temperature Conversion Connector (optional) | Channels can be customized |
| Security Protection Design | Overload protection; Equipped with leakage protection device, access control, safety emergency stop switch, and three color light alarm |
| Explosion Proof Chain | The door is equipped with 2 explosion-proof chains to prevent it from being blown away and injuring people |
| Power Supply | AC220V 50HZ 2kW |
| External Dimension |
216L: W850 × D800 × H1650mm 1m³: W1220 × D1250 × H1750mm |
| Weight |
216L: around 400 kg 1m³: around 1000 kg |
| Compressed Air Source | ≥ 0.6 MPa |
⭐ Key Features
- 🛡️Safety Protection System Equipped with explosion-proof pressure relief doors, automatic fire extinguishing devices and smoke sensing monitoring, providing comprehensive safety and reliability during the testing process.
- 🔩Inner Liner Material & Process Uses SUS304 stainless steel, with the entire machine designed for thickening and reinforcement, possessing excellent pressure resistance structure and service life.
- 🖥️Intelligent Control System Uses PLC programmable control combined with a touch screen human-machine interface, supporting remote real-time monitoring and the function of exporting test data.
- ⚙️Vacuum System Solution Selects a German original fixed-displacement vacuum pump, featuring low operating noise, stable and durable performance, and high pumping efficiency.
📜 Standards Compliance
- UN 38.3
- MIL-STD-810G
- IEC 60068-2-13
🏭 Application
❓ Frequently Asked Questions
-
Q What is the maximum altitude (in meters) that this device can simulate?Our standard model can simulate low-pressure environments ranging from normal pressure to 0.5 kPa, corresponding to altitudes of approximately 30,000 to 45,000 meters. For special test requirements, an upgraded high-grade vacuum system can be adopted to further achieve deep-space environment simulations with pressures as low as 100 Pa or even lower.
-
Q How can I determine the appropriate size of the test chamber based on my test samples?It is recommended that the sample volume should not exceed one third of the volume of the laboratory. This measure not only facilitates the loading and unloading of the samples, but also ensures the uniformity of air extraction inside the chamber. At the same time, in tests involving electricity and heat generation, it can reserve sufficient space for the installation of heat exchange and auxiliary cooling devices.
-
Q What impact does a low-pressure environment have on the heat dissipation of electronic products?In a low-pressure environment, the air becomes thinner, and the convective heat dissipation effect will significantly decrease. If the product being tested generates a large amount of heat during operation, please inform us in advance. We will re-calculate the cooling system configuration based on the actual heat load and assess whether additional liquid cooling or forced air cooling and other auxiliary heat dissipation solutions are needed.
-
Q What standards does the TA-DQY low pressure test chamber comply with?The TA-DQY series low pressure test chamber complies with internationally recognized standards including UN 38.3 (for lithium battery transportation safety), MIL-STD-810G (US military environmental engineering standard), and IEC 60068-2-13 (reduced atmospheric pressure testing for electronic components). These certifications ensure the equipment meets the most demanding global testing requirements.
-
Q Can the test chamber be customized for specific testing needs?Yes. The TA-DQY series supports a range of customization options, including chamber wall thickness, terminal post specifications (300A–400A), voltage-temperature conversion connector channels, and internal rack configurations. Please contact our engineering team with your specific requirements and we will provide a tailored solution.
-
Q What safety mechanisms are built into the low pressure test chamber?The chamber is equipped with multiple layers of safety protection, including explosion-proof pressure relief doors, an automatic fire extinguishing system, smoke sensing monitoring, overload protection, leakage protection devices, access control, a safety emergency stop switch, a three-color light alarm system, and two explosion-proof chains on the door to prevent it from being blown open during testing.