Home
High-low temp-humidity test chamber
Technical Specifications
|
Model |
TAH-23L |
TAH-64L |
TAH-80L |
TAH-100L |
TAH-120L |
TAH-150L |
TAH-225L |
TAH-408L |
TAH-800L |
TAH-1000L |
|||
|
Control System |
Balance temperature and humidity control system |
||||||||||||
|
Temperature range |
-20℃～150℃；-40℃～150℃；-70℃～150℃ (Rapid temperature change, linear throughout the entire process, non-linear selectable) |
||||||||||||
|
Humidity range |
20℃～98%R.H |
||||||||||||
|
Temperature fluctuation |
±0.5℃ |
||||||||||||
|
Humidity fluctuation |
±2.5%R.H |
||||||||||||
|
Temperature deviation |
±2.0℃ |
||||||||||||
|
Humidity deviation |
±3%R.H(≥75%R.H）/±5%R.H(<75%R.H） |
||||||||||||
|
Heating up time |
-20℃～150℃ around 45 minutes； -40℃～150℃ around 60 minutes；-70℃～150℃ around75 minutes |
||||||||||||
|
Cooling time |
20℃～-20℃ around 40minutes； 20℃～-40℃ around 60 minutes；20℃～-70℃ around 85minutes |
||||||||||||
|
Inner size（cm） |
Ｗ |
30 |
40 |
40 |
50 |
50 |
50 |
60 |
68 |
100 |
100 |
||
|
Ｈ |
30 |
40 |
50 |
50 |
50 |
60 |
75 |
80 |
100 |
100 |
|||
|
Ｄ |
25 |
40 |
40 |
40 |
48 |
50 |
50 |
75 |
80 |
100 |
|||
|
Outer size（cm） |
Ｗ |
50 |
60 |
60 |
70 |
70 |
70 |
80 |
88 |
120 |
120 |
||
|
Ｈ |
125 |
140 |
155 |
155 |
155 |
161 |
171 |
176 |
195 |
195 |
|||
|
Ｄ |
90 |
110 |
110 |
115 |
123 |
125 |
125 |
150 |
155 |
175 |
|||
|
Inner material |
ＳＵＳ３０４ Advanced stainless steel |
||||||||||||
|
Outer material |
Cold rolled steel plate surface treatment by electrostatic spraying or SUS304 high-grade stainless steel |
||||||||||||
|
Insulation material |
High density polyurethane foam and glass fiber |
||||||||||||
|
Freezing system |
Air cooled (optional water-cooled) |
||||||||||||
|
Controller |
LCD color touch screen, Chinese/English display, program, communication function |
||||||||||||
|
Protector |
Non fuse switch, compressor overpressure, overheating, overcurrent protection, overtemperature protection, fan overload protection, fuse, dry burning machine protector, water shortage protection switch, fault warning system, alarm |
||||||||||||
|
Standard accessories |
One observation window for the three-layer vacuum layer, one Ø 5cm test hole, two sets of experimental racks, one illumination board inside the box, four indicator lights, four mobile work wheels, one humidification water tank, a 2-meter power cord, and a communication interface (customizable according to requirements) |
||||||||||||
|
Environmental temperature for use |
5℃～35℃ |
||||||||||||
|
Supply power |
AC380±10% 50HZ |
||||||||||||
Key Highlights
How to Choose a Sensor?
Application
Compliance & Standards
FAQ
-
1.Why use pure water or distilled water?
The impurities present in tap water can easily form scale, causing blockages in the humidification pipeline and reducing the accuracy of the humidity sensor's detection. -
2.How often should the humidity sensor wick be replaced?
Based on the water quality and usage frequency, it is recommended to replace it every 3 months. This device comes with a box of replacement parts as a standard. -
3.Can the equipment undergo a stability test lasting for 30 days or even longer?
OK. The equipment is equipped with automatic water replenishment function in case of water shortage and multiple protection functions against overheating. It can support long-term continuous operation without human intervention.