Essential environmental simulation and stress screening equipment engineered to meet SLSI (Sri Lanka Standards Institution) and international IEC/ISO battery compliance protocols.
Strategic insights into the Indian Ocean island's green energy evolution, regulatory convergence, and localized testing requirements.
Sri Lanka stands at the threshold of an unprecedented energy transition. Driven by the national target to generate 70% of electricity from renewable energy sources by 2030, the adoption of stationary Battery Energy Storage Systems (BESS) and distributed solar photovoltaics has rapidly intensified across provinces from Jaffna to Hambantota. Concurrently, the electrification of Sri Lanka's iconic three-wheelers (e-tuk-tuks), light commercial vehicles, and urban electric two-wheelers has created an urgent demand for certified, high-density Lithium-ion and Nickel-metal hydride secondary battery packs.
However, operating energy storage solutions in Sri Lanka presents distinct environmental hurdles. The tropical maritime climate, characterized by ambient temperatures exceeding 35°C and relative humidity levels frequently hovering around 85% to 90% in coastal regions like Colombo, Galle, and Trincomalee, significantly accelerates cell degradation, electrolyte vaporization, and thermal runaway risks. Implementing stringent IEC 62133 safety testing is therefore no longer optional—it is a critical industrial safeguard.
As regulatory frameworks align with global trade requirements, manufacturers, importers, and assemblers in Sri Lanka are required to conform to IEC 62133-1 (Nickel systems) and IEC 62133-2 (Lithium systems). Local testing laboratories, university research hubs like the University of Moratuwa, and BOI (Board of Investment) export processing zones require precision chambers to qualify cell integrity against internal short circuits, overcharging, and thermal shock.
Over 1.2 million three-wheelers in Sri Lanka are entering retrofit and electric conversion pipelines. Battery packs must withstand continuous mechanical vibration over varied road topographies alongside intense daily heat cycles without risk of fire or casing rupture.
Telecommunication infrastructure providers such as Dialog Axiata and SLT-Mobitel depend on reliable battery banks to power remote relay towers in the Central Highlands. These batteries undergo rigorous thermal cycling to prevent unexpected brownouts.
Precision agricultural machinery, solar-powered drying units, and sensor-driven estate monitoring across Nuwara Eliya and Kandy require robust battery packs tested against moisture condensation, rain ingress, and thermal fluctuations.
Located in Qiaotou Town, Dongguan, Guangdong Taian Testing Equipment Co. was established in Dongguan on March 10, 2017 with a registered capital of 12 million. The company is divided into two major types of products: environmental test equipment and safety test equipment. After years of development and accumulation, it is one of the strongest manufacturers of related equipment with the strongest professional strength in China, and it is a national high-tech enterprise integrating research and development, production, sales and service. The company's plant covers an area of more than 5,000 square meters. The annual production capacity reaches more than 100 million yuan, with more than 60 employees, 15 people with college degree or above, including 5 professional senior engineers.
By delivering high-precision environmental test chambers and battery safety equipment engineered under strict ISO 9001 and CE directives, Taian Testing provides end-to-end turnkey laboratory support to Sri Lankan research institutions, commercial battery testing hubs, and multinational contract manufacturers.
Understanding the standard test sequences executed inside our precision environmental chambers for secondary cells and battery modules.
Under IEC 62133-2 clause 7.3.5, fully charged cells are stabilized in a gravity convection chamber at 130°C ± 2°C for 10 to 30 minutes. The test ensures the separator does not melt prematurely, avoiding catastrophic internal short-circuits in tropical conditions.
Simulates real-world traffic collisions and accidental drops experienced in Sri Lankan urban transit. Cells are subjected to hydraulic crushing forces until 13 kN is reached or an instantaneous 100 mV voltage drop occurs without explosion.
Cells and battery packs are conditioned at an elevated temperature of 55°C ± 5°C before being externally short-circuited with a total circuit resistance of < 80 mΩ, validating safety vents and current-interrupt devices (CID).
Replicates cargo air freight transport and high-altitude mountain deployment. Test chambers drop ambient pressure to 11.6 kPa for 6 hours, confirming no electrolyte leakage, cell de-crimping, or smoke emission.
Multi-rate charging cycles at specified ambient profiles ensure onboard Battery Management Systems (BMS) and protective cut-offs respond seamlessly during grid surges or malfunctioning chargers.
Crucial for Sri Lankan monsoon seasons. Tests battery enclosures with high-pressure washing and heavy rain simulation, ensuring zero moisture penetration into active electrical contacts.
By collaborating with premium industry partners and selecting top-tier brands, we build a trusted business ecosystem rooted in craftsmanship and excellence.
View More Solutions
The company's main products are, battery safety testing equipment: battery squeeze pinprick tester, battery short circuit tester, battery thermal runaway tester, battery external fire tester, battery thermal abuse tester, battery drop tester, battery impact tester, the bottom of the ball impact pinprick tester, simulation of high-altitude low-pressure tester, battery explosion-proof box, and other types of non-standard customized equipment. Environmental test equipment: constant temperature and humidity chamber, walk-in constant temperature and humidity chamber, high and low temperature test chamber, rapid temperature rise and fall test chamber, cold and hot impact test chamber, salt spray test machine, aging room, sand and dust box, rain box, ultraviolet weathering test chamber and other customized according to the customer's needs of environmental reliability testing equipment.
Read More & Contact Engineering TeamSpecializing in the production of internal and external wall paint, white glue, waterproof coating, adhesive, epoxy floor paint and other products








Connecting with battery technologists, e-mobility pioneers, and safety standard regulators worldwide.
Our environmental and safety test systems are engineered to meet global compliance standards including ISO 9001, CE directives, and CNAS calibration benchmarks.
Full spectrum of advanced chambers customized for Sri Lanka's testing laboratories, automotive integrators, and industrial research institutions.
Expert insights on establishing an IEC 62133 certified battery testing workflow in South Asia.
While UN 38.3 is mandatory for hazardous goods air/sea transport clearance at the Port of Colombo and Bandaranaike International Airport, IEC 62133 certifies end-use product safety for consumer electronics, industrial battery packs, and EV energy storage systems.
Our chambers feature SUS304/SUS316 high-grade stainless steel interior liners, anti-corrosion condenser fin coatings, and hermetically sealed refrigeration circuits engineered specifically for tropical maritime climates.
Chambers come integrated with automatic inert gas (N2/CO2) fire suppression systems, explosion-relief blowout ports, real-time multi-channel temperature monitoring, and flammable gas detection sensors.