Leave Your Message
The rapid temperature change test: the higher the temperature change rate, the more stringent the test?
Industry News

The rapid temperature change test: the higher the temperature change rate, the more stringent the test?

2026-09-29

Reliability verification is increasingly being applied in rapid temperature variation boxes. Many purchasing and testing engineers have developed an inherent understanding: the faster the temperature variation rate, the better the equipment performance; the more stringent the test conditions, the easier it is to expose product defects.

When selecting models, people tend to pursue higher temperature rise and drop rates blindly, and when conducting tests, they directly set the rate to the maximum. However, in many cases, an excessively high temperature variation rate may instead lead to false failures.

According to relevant specifications such as GB/T2423 and IEC60068, rapid temperature variation tests aim to simulate the alternating temperature changes in real environments, and it is not the case that the faster the rate, the better.

  • Excessive speed setting: The air temperature inside the box changes sharply, but the internal components of the product cannot keep up with the shell temperature. An extremely large temperature difference stress is formed between the inside and outside of the product, which will cause damage such as false soldering and cracking that would not occur in actual use, resulting in false failure results.
  • Insufficient speed setting: The temperature stress is insufficient, and the potential defects of the product cannot be fully exposed. The test cannot play its role in screening.

Here, a key point needs to be clarified: We should focus on the actual temperature change rate within the product, rather than the air temperature rise and drop rate marked on the box as the nominal value when it is unloaded. Many equipment labels indicate the rate under unloaded conditions. However, when the sample is placed and runs under load, the actual rate will significantly decrease. This is a common pitfall that is easily overlooked during the selection process.

✅ Simulate sudden temperature changes in outdoor environment: Select a rate of 5-10℃/min, which closely matches the real natural environmental changes;

✅ Need to accelerate the exposure of product defects: You can choose a higher rate of temperature increase and decrease, and expand the temperature stress within a reasonable range to quickly expose design and process flaws.

1. When selecting equipment, do not only rely on the no-load speed indicated on the equipment nameplate. The key is to confirm the actual temperature change rate after loading the sample.
2. Prioritize following the product specifications. Do not blindly set the speed to the maximum value.
3. Evaluate the sample's heat capacity. For large mass samples like battery packs, even if the equipment has a high-rated speed, the internal temperature of the product will still lag behind.

Summary

The rapid temperature change test should adopt an appropriate rate, which is much higher than simply pursuing high speed. Deviating from the actual operating conditions of the product and blindly increasing the heating and cooling rates will result in very low reference value for the test results.

Contact Us

We will contact you within one working day. Please pay attention to your email.